Deutschland
International
Česko
Danmark
India
Indonesia
Magyarország
Nederland
Norge
Österreich
Polska
Portugal
Schweiz
Suomi
Sverige
Türkiye
United KingdomDP 9222
- Cable junction box for normal environment and protected outdoor
- With branch terminal
- Dimensions H x W x D: 119 x 139 x 49 mm
- For cable trunking and conduit installation
ELECTRICAL PROPERTIES
Ui = 690 V
CONNECTION DATA
| Maximum number of conductors clamping units each | Conductor cross-section min. | Conductor cross-section max. | Conductor cross section | Conductor type | Conductor material |
|---|---|---|---|---|---|
| 6 | 1.5 mm² | 1.5 mm² | solid, stranded | round | Cu |
| 4 | 2.5 mm² | 2.5 mm² | solid, stranded | round | Cu |
| 3 | 4 mm² | 4 mm² | solid, stranded | round | Cu |
| 2 | 6 mm² | 6 mm² | solid, stranded | round | Cu |
1
Screw connection
Yes
11 mm
1.2 Nm
MECHANICAL PROPERTIES
Screwed
sealing plug
IP54
IK07
No
AMBIENT CONDITIONS
Indoor installation
35 °C
-25 °C up to +40 °C
≤ 50 % at 40 °C, ≤ 100 % at 25 °C
MATERIAL PROPERTIES
Polystyrene
750 °C
V-2
-25 °C up to +70 °C
Yes
Yes
DIMENSIONS
119 mm
139 mm
49 mm
0.278 kg
CERTIFICATES
DIN EN 60670-1/-22, IEC 60670-1/-22
| Type of certificate | Certificate number |
|---|---|
| VDE | 40049686 |
SALES DATA
6000042
4012591600428
2
85369010
DYNAMIC: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-8.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-7.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-6.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-5.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-4.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
NOTE
TENDER TEXT
Cable junction boxes in accordance with IEC 60670-22, with permanently installed terminal block and push-in plugs for cable entry. Suitable for indoor use and protected outdoor installation in accordance with DIN VDE 0100, Part 737. For ambient temperatures maximum +40 °C and minimum −25 °C, at relative humidity 50% at 40 °C or 100% at 25 °C. Material temperature resistance from −25 °C to 70 °C; flammability in accordance with VDE 0471, Part 2 – glow-wire test 750 °C, UL Subject 94 V-2. Degree of protection to IEC 60529: IP 54. Rated insulation voltage: 690 V, DIN VDE 0110. Material: thermoplastic, halogen- and silicone-free. Colour: grey, RAL 7035. Lid fixing screws made of V2A stainless steel. Manufacturer: HENSEL DK.
Nominal cross-section: 2.5 mm², 2 terminals each 5-pole, dimensions HxWxD 119 x 139 x 49 mm
DATA SHEETS
DECLARATION OF CONFORMITY
Catalogues + Brochures
CERTIFICATES
Attached accessories
ACCESSORIES
