WP 1006 G

Product properties

Open all Close all

ELECTRICAL PROPERTIES

Rated insulation voltage:

U_i = 690 V

Rated current:

I_n = 40 A

CONNECTION DATA

Terminal cross-section:

Maximum number of conductors clamping units each	Conductor cross-section min.	Conductor cross-section max.	Conductor cross section	Conductor type	Conductor material
3	1.5 mm²	1.5 mm²	solid, stranded, flexible	round	Cu
2	2.5 mm²	6 mm²	solid, stranded, flexible	round	Cu
1	10 mm²	10 mm²	solid, stranded, flexible	round	Cu

Number of clamping units per pole:

Connection type:

Screw connection

Ferrule required for flexible conductors:

Dismantling length:

12 mm

Tightening torque of the terminal:

1.5 Nm

CABLE ENTRIES

Cable entries:

Number of cable entries	Type of cable entry	Size of the metric knockouts	Location of cable entry
10	metric knockouts	M20, M25, M32	wall
2	metric knockouts	M25	bottom

MECHANICAL PROPERTIES

Type of lid fastening:

Quick locking: Opening and closing by quarter turn, locked position well visible (open - locked)

Delivered accessories:

external brackets, sealing plug

IP degree of protection:

IP66, IP68, IP69IP68: Permanent submersion, VDE-tested up to 20 m / 168 hIP69: Water pressure max. 100 bar, water temperature max. 80 °C, distance ≥ 0.15 m

Impact strength:

IK09

Sealable without accessories:

Yes

Can be sealed:

Yes

Sealing compound supplied:

Yes

AMBIENT CONDITIONS

Suitable for installation in ground without traffic loads

Application area:

Outdoor installation

Maximum ambient temperature 24 h:

55 °C

Ambient temperature:

-25 °C up to +70 °C

Relative humidity:

≤ 50 % at 40 °C, ≤ 100 % at 25 °C

MATERIAL PROPERTIES

Material:

Polycarbonate

Glow wire test according to IEC 60695-2-11:

960 °C

UL 94:

V-0

Temperature resistance:

-25 °C up to +100 °C

Halogen-free:

Yes

Silicone-free:

Yes

Weatherproof:

Yes (resistant to UV exposure due to solar radiation, ice and sea water, corrosion, temperature resistant, impact-resistant)

DIMENSIONS

Height:

130 mm

Width:

180 mm

Depth:

77 mm

Net weight:

1.687 kg

COLOURS

Colour:

grey, similar to RAL 7035

CERTIFICATES

Conforming to the standards:

DIN EN 60670-1/-22, IEC 60670-1/-22

Certificates:

Type of certificate	Certificate number
VDE	40045695

SALES DATA

Product number:

62000107

EAN:

4012591123613

Pack unit:

Customs tariff number:

85369010

ETIM class:

DYNAMIC: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-8.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-7.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-6.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-5.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-4.0: EC002600 - Box/housing for surface mounting on the wall/ceiling

NOTE

durability of sealing compound to processing ≥ 12 months at a storage temperature of 5 - 50 °C

usable for heating cable / heating tape up to max. 70 °C surface temperature

Included sealing compound GH 1200 and sealing plugs for the metric knockout to be opened for encapsulating

When installing through the base of the housing, the sealing plugs must be inserted so that the sealing compound remains in the housing.

TENDER TEXT

Tender text:

Cable junction boxes waterproof, for encapsulation, in accordance with DIN VDE V 0606-22-100, with built-in connecting terminal and metric knockouts. Suitable for indoor and unprotected outdoor installation in accordance with DIN VDE 0100, part 737. For ambient temperatures maximum value +70 °C and minimum value -25 °C, with relative humidity of up to 100 %. Material temperature resistance of -25 °C to +90 °C, burning behaviour according to IEC 60695-2-11 - glow wire test 960°C, UL Subject 94 V-0. Degree of protection IP 68. Rated insulation voltage: 690 V. Material: PC thermoplastics, weatherproof, halogen- and silicone-free. Colour: grey, RAL 7035. Make: HENSEL WP., Nominal cross-section: 1.5-6 mm², 5-pole terminal, dimensions HxWxD 130 x 180 x 77 mm

Downloads