DK 2516 A

Product properties

Open all Close all

ELECTRICAL PROPERTIES

Rated insulation voltage:

U_i = 1000 V

Rated current:

I_n = 76 A

CONNECTION DATA

Terminal cross-section:

Maximum number of conductors clamping units each	Conductor cross-section min.	Conductor cross-section max.	Conductor cross section	Conductor type	Conductor material
2	1 mm²	6 mm²	solid, stranded, flexible	round	Cu
1	1.5 mm²	25 mm²	solid, stranded	round	Cu
1	1.5 mm²	25 mm²	flexible	round	Cu
1	2.5 mm²	25 mm²	solid	round	Al

Number of clamping units per pole:

Connection type:

Screw connection

Ferrule required for flexible conductors:

Dismantling length:

14 mm

Tightening torque of the terminal:

3 Nm

CABLE ENTRIES

Cable entries:

Number of cable entries	Type of cable entry	Size of the metric knockouts	Location of cable entry
10	metric knockouts	M25, M40, M50	wall

MECHANICAL PROPERTIES

Type of lid fastening:

Quick locking: Opening and closing by quarter turn, locked position well visible (open - locked)

Delivered accessories:

external brackets, sealing plug

IP degree of protection:

IP66IP degree of protection of the included Grommets 3x ESM 40: IP55, sealing range 17 mm - 30 mm

Impact strength:

IK07

Sealable without accessories:

yes

AMBIENT CONDITIONS

Application area:

Indoor installation

Maximum ambient temperature 24 h:

35 °C

Ambient temperature:

-25 °C up to +40 °C

Relative humidity:

≤ 50 % at 40 °C, ≤ 100 % at 25 °C

MATERIAL PROPERTIES

Material:

Polycarbonate

Glow wire test according to IEC 60695-2-11:

750 °C

UL 94:

V-2

Temperature resistance:

-25 °C up to +80 °C

Halogen-free:

yes

Silicone-free:

yes

DIMENSIONS

Height:

205 mm

Width:

255 mm

Depth:

112 mm

Net weight:

1.113 kg

CERTIFICATES

Conforming to the standards:

DIN EN 60670-1/-22, IEC 60670-1/-22

Certificates:

Type of certificate	Certificate number
VDE	40049684

SALES DATA

Product number:

62000166

EAN:

4012591125570

Pack unit:

Customs tariff number:

85369010

ETIM class:

DYNAMIC: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-8.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-7.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-6.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-5.0: EC002600 - Box/housing for surface mounting on the wall/ceiling
ETIM-4.0: EC002600 - Box/housing for surface mounting on the wall/ceiling

NOTE

Before connecting, aluminum conductors must be pre-treated according to the appropriate technical recommendations, see technical information aluminum conductors

When using the sealing plugs supplied, the specified protection class is not changed.

TENDER TEXT

Tender text:

Cable junction boxes in accordance with IEC 60670-22, with built-in terminal blocks and metric knockouts. Terminal blocks suitable for copper and aluminum conductors. Suitable for indoor and protected outdoor installation in accordance with DIN VDE 0100, part 737. For ambient temperatures maximum value +40 °C and minimum value -25 °C, with relative humidity of 50 % at +40 °C or 100 % at +25 °C. Material temperature resistance of -25 °C to +70 °C, burning behaviour according to IEC 60695-2-11 - glow wire test 750 °C, UL Subject 94 V-2. Degree of protection in accordance with IEC 60529: IP 66 with AKM cable glands. Material: thermoplastics, halogen- and silicone-free. Colour: grey RAL 7035. Lid fastening with quick fasteners, sealable without accessories. Plug-in external brackets for wall mounting included. Make: HENSEL ENYCASE DK., Rated insulation voltage 690 V. Nominal cross-sections: 6-16 mm², 5-pole, dimensions HxWxD 205 x 255 x 112 mm

Downloads

Open all Close all